01 · Research question
How much thermal power leaves a geothermal water stream for specified flow and inlet/outlet temperatures?
02 · Demonstration model
P = m_dot × cp × (Tin − Tout) Choose cp = 4.18 kJ/(kg·K), hold outlet at 50 °C and assume pressurized, single-phase liquid water. Inputs are illustrative.
03 · Sensitivity result
5 kg/s and a 70 K drop give 1463 kW thermal. At fixed temperatures, 5.5 kg/s gives 1609.3 kW (+10%). This is a model identity, not a measured improvement or electrical output.
04 · Next validation step
Measure flow, temperature and pressure; evaluate heat losses and actual fluid properties. Exchanger limits and reservoir behavior require additional models. Dr. Leila Haddad · fictional researcher